Shunda International Industrial Limited

Showing 1 - 9 of 9, total 1 pages [First] [Previous] [Next] [Last]

tall oil pitch cas#:8016-81-7
Specification: Acid Value(mg KOH/g)ï¼?5-60
Detail: Tall Oil Pitch is a kind of by-products, distilled in the process of sulfate method from pulp mill. It mainly contain low boiling point alcohol, ether material and palmitic acid which can be used in the production of casting b...

dipentene cas#:138-86-3
Specification: Appearance: Slightly yellow liquid.
Detail: Appearance: Slightly yellow liquid. Relative Density at 20/20â„? 0.8500 min Refractive Index at 20â„? 1.4680 to 1.4770 Boiling Range at 173 to 190â„ƒï¼š92% min Flash Pointï¼?3â„?Payment=FOB or CNF or CIF

barium nitrate cas#:10022-31-8
Specification: Appearanceï¼šWhite crystal or powder
Detail: Appearanceï¼šWhite crystal or powder Ba(NO3)2ï¼šâ‰¥99.3% Moistureï¼šâ‰¤0.03% Water insoluble matterï¼šâ‰¤0.05% Feï¼šâ‰¤0.001% Oxide (BaCl2)ï¼šâ‰¤0.05% pH Value(10g/L)ï¼?.5-8.0

urea (0.85-2.8mm) cas#:57-13-6
Specification: Appearanceï¼šColorless transparent or white microstrip yellow
Detail: Nitrogenï¼?6% min Biuretï¼?% max Moistureï¼?% max Sizeï¼?.85-2.8mm, 90% min

tall oil fatty acid cas#:61790-12-3
Specification: Acid Value mg KOH/gï¼šâ‰¥190-195
Detail: Acid Value mg KOH/gï¼šâ‰¥190-195 Rosin Acidï¼šâ‰¤6.0% Unsaponificationï¼šâ‰¤1.0% Fatty Acidï¼šâ‰¥92-98% Color Numberï¼šâ‰¤3-8

gum rosin(ww grade) cas#:8050-09-7
Specification: Colorï¼šPale Yellow
Detail: Appearanceï¼šTran***rent solid Softening point T(R.&B.)ï¼?6â„?min Acid Value mg KOH/gï¼?66 min Unsaponification contentï¼?% max Toluene insoluble contentï¼?.03% max Ash contentï¼?.02% max

pine oil 85% cas#:8002-09-3
Specification: Appearance: Slight yellow liquid
Detail: Colorï¼šNo.7 maximum. Alcohol Contentï¼?5% Minimum Relative Density at 25/25â„? 0.904ï¼?.940 Boiling Range: 185 to 225â„? 90% min Flash Point : 80â„?Payment=FOB or CNF or CIF

crude sulfate turpentine oil cas#:8006-64-2
Specification: Appearanceï¼šbrown transparent liquid
Detail: Acid number mg KOH/g:2 maximum Density, at20â„ƒï¼š 0.86 to 0.87 minimum Alfa-pineno: 54% minimum Beta-pineno: 8% minimum Dipentene: 5.8% minimum Sulphur Content: 2% maximum

turpentine oil cas#:8006-64-2
Specification: Appearanceï¼šTransparency Liquid
Detail: Proportion d20/4ï¼šâ‰¤0.870 Refractive Indexï¼?.4650-1.4710 Initial Boiling Pointâ„ƒï¼š150 min Distillate Volume Under 170â„ƒï¼š90% min Acid No.(mgKOH/g)ï¼šâ‰¤0.5


Showing 1 - 9 of 9, total 1 pages [First] [Previous] [Next] [Last]
1